规格
|
|
Compatible Cells:
|
Eukaryotic Cells |
|
Excitation/Emission:
|
650⁄665 |
|
Flow Cytometer Laser Lines:
|
633/635 |
|
Form:
|
Solid |
|
Label or Dye:
|
LIVE/DEAD® Fixable Far Red Dead Cell Stain |
|
No. of Reactions:
|
400 |
|
Product Line:
|
LIVE/DEAD® |
|
Shipping Condition:
|
Room Temperature |
|
Solubility:
|
DMSO (Dimethylsulfoxide) |
|
Detection Method:
|
Fluorescent |
|
For Use With (Equipment):
|
Flow Cytometer |
|
Format:
|
Tube(s) |
储存
|
|
Contains 10 vials of LIVE/DEAD® fixable dead cell stain and 500 µL DMSO. Store at -20°C. |
The LIVE/DEAD™ Fixable Far-Red Dead Cell Stain Kit is used to determine the viability of cells prior to the fixation and permeabilization required for intracellular antibody staining or prior to elimination of biohazardous materials using formaldehyde fixation. This kit has been optimized and validated for use with a red laser flow cytometer.
• Stable—dyes are freeze dried in separate vials to maintain stability
• Robust—staining pattern is the same before and after fixation
• Bright signal—allows for easy distinction between live/dead cells in single channel
View a selection guide for all fixable viability dyes for flow cytometry.
Stable
Unlike products that are sold in solution, the LIVE/DEAD™ Fixable Far-Red Stain has been conveniently packaged in 40-test vials to help ensure the stability and performance of the dye over time. Amine reactive dyes in solution will lose their effectiveness over a short period of time, therefore it is recommended to completely use the vial once rehydrated. If this is not possible, aliquot the vials in small volumes and store at -80°C, avoiding freeze-thaw cycles.
Robust
Dead cell discriminator stains can lose sensitivity after treatment with fixatives such as formaldehyde or ethanol-based fixation methods required for intracellular phosphorylation studies. The LIVE/DEAD™ Fixable Far-Red Stain is an amine reactive dye that binds covalently to intracellular and extracellular amines, and the staining pattern is preserved following formaldehyde fixation.
Optimal brightness
The LIVE/DEAD™ Fixable Far-Red Stain was selected based on its fluorescent properties to provide a bright signal when excited with a red laser. The far-red fluorescent reactive dye has an excitation maximum of ~633 nm making it ideal for use with the red or HeNe laser with an emission of ~655 nm. Since live and dead cells can be discriminated using a single dye and a single channel of a flow cytometer, it is an ideal choice for multi-color experiments.
How it works
In cells with compromised membranes, the dye reacts with free amines both in the cell interior and on the cell surface, yielding intense fluorescent staining. In viable cells, the dye's reactivity is restricted to the cell-surface amines, resulting in less intense fluorescence. The difference in intensity is typically greater than 50-fold between live and dead cells, allowing for easy discrimination.
Colors available
LIVE/DEAD™ Fixable Dead Cell Stains are available in a wide variety of colors to meet your multi-color panel needs.
